1.When you doing cutting grass, you need to use a belt to hang it on the shoulder. It is Plastic material, not brittle.
2.Can be used with different aluminum tube size easy to use for both hand.
3.Make your operation more comfortable and safe, good to use any side of hand.
4.Simple screw installation and easy.
5.In line with the current operation button design for brush cutter operation
6.Packaging 100 pc, 50 pc, 20 pc
7.Delivery time 10 to 15 days
1、當你割草時，你需要用皮帶把它掛在肩膀上。它是塑膠材料，不容易碎的。
2、可用于不同鋁管尺寸，便於兩手使用。
3、使您的手更加舒適、安全，使用任何一支手都好。
4、安裝簡單，操作簡單。
5、符合當前刷割草機操作按鈕的設計
6、包裝100pcs，50pcs，20pcs
7、交貨時間10～15天
When you do cutting grass control the gas and oil when you want add more or stop the cutting good control handle will important. Tianfu brush cutter handle is made plastic material and aluminumso there will be no corrosion rust problem, the operation installs in the brush cutter pip or trimmer tube.it work perfect for shoulder type or back pack type brush cutter. Handle is good for both hand operation. Let you swing in the operation of the arc while cutting grass more comfortable and safe.
With two hands grasped operation, one hand for catch the security and control and other just for power control. when you are in operation you can quickly complete the work in handsome movement. With right control stich can add oil or stop at any time you can.
It is very important to master the mowing in the mowing work. Simply install the 4 screws to lock and no any electronics system. Easily complete the operation of your mower handle. A good touch of a good mowing for the environment and bring a better green environment.
當你想要割草以控制燃氣和油時或是你想要控制添加或停止割草機時，良好的控製手柄將是重要的。添富割草機手柄採用塑料和鋁材製造，不會產生腐蝕生鏽問題，操作安裝在割灌機或微調管內，適用於肩式或背覆式割草機。手柄有利於手部操作。讓您操作時可安全且舒適的割草。
用雙手操作時，一隻手可安全的控制，另一隻手控制電源。 當您在操作時，可以快速完成割草
割草工作時的組裝非常重要。 只需安裝4個螺釘即可鎖緊，無需任何電子系統。 輕鬆完成割草機手柄的組裝。 良好的修剪可帶來更好的綠色環境。
Step1. Open the package, there are control hook make sure your aluminum pip size before start to do installing
Step2 handle holder against the aluminum tube to adjust the appropriate distance, locked up
Step3 Try to see the correct operation before starting, if necessary, then loosen the screw to adjust the distance.
步驟1. 打開包裝，有該零件，確保你的鋁管尺寸並開始做組裝
步驟2. 把手支架對著鋁管調整適當的距離，鎖上
步驟3. 如果需要，嘗試在啟動前查看正確的組裝，然後鬆開螺絲以調整距離。
.jpg)
|
